CM Box User GuideMain Page | About | Special pages | Log in

Printable version | Disclaimer | Privacy policy | Current revision

Revision as of 09:03, 11 August 2006; view current revision
←Older revision | Newer revision→

Entering and importing weather and crop data.

After a network has been created, crop data can be entered by hand. In principle this is possible for grid-based networks and station networks alike. However as grid-based networks do not coincide with a ground network, it will usually not make sense to enter data manually.

Entering weather data manually

As the FAO water balance model is usually run with a 10-day (dekadal) time step, this example will show how to enter dekadal data.


Activate the Database - Manage Weather Data - Dekad function. In this example data for Bangladesh are entered.
In this window the grid is defined. At first select the polygons in the top box and select them with the down-arrow. Then specify the grid density. In this case 0.,5 degrees is chosen. Press <Redraw> to see the result. This means that a square grid will be created where stations are half a degree apart. Please note that the program predicts the creation of 1343 stations. Specify a list name to be generated and prefixes for the station names and ID’s in order to clearly distinguish the stations in the list.
After pressing the <Generate>, the list is filled and finally shown in the AgrometShell list editor.










0 Page generated in 0.167273 seconds.